Serving the Laredo area  ·  (956) 539-2939  ·  Open Mon-Sun 7am-7pm
📞 (956) 539-2939 Free Quote

Metal Roofing in Zapata, TX (78076) · Local Professionals

Laredo Metal Roofing · Fast response in Zapata and the Laredo area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+152Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Zapata runs on heat, wind, and lake-country grit. Whether your place sits near Falcon Lake, off Highway 83, or out on a ranch road toward San Ygnacio, the sun and storms here work on a roof every single day. Most homes and outbuildings around town are single-story ranch houses, brick or stucco, with low-pitch shingle roofs that were never built for this kind of UV load. Metal changes that.

Homeowners and property managers in Zapata (78076) call Laredo Metal Roofing because we know what fails here: fasteners that back out, sealant that bakes and cracks, and panels that lift when a storm rolls across the brush country. We are based in Laredo, fully insured, and we work Zapata and the surrounding areas regularly. One call to (956) 539-2939 gets a real person and a free on-site look.

Metal Roofing in Zapata (78076)

Zapata County ground is caliche and clay, and it moves with the seasons. That matters for roofing because a roof is only as good as what holds it down. On ranch properties and acreage outside town, we deal with long panel runs, outbuildings, barns, and carports that need commercial-grade fastening and bracing, not a residential patch kit. In town, lots are tighter, soffits and fascia are often older wood, and we frequently find previous repairs where sealant was smeared over a problem instead of fixing it. The heat is the other factor. Triple-digit summers and year-round sun bake shingles, dry out flashing, and shrink the neoprene washers on old screws. When a storm finally hits, those are the spots that leak.

Our team has worked metal roofs across the Laredo area and out toward Zapata and Hebbronville long enough to know which profiles and fastening methods hold up in this climate. We install standing seam, corrugated and ribbed panels, metal shingles, stone-coated steel, and copper and specialty metal. We also repair, replace, and retrofit over existing shingles where code allows. If you have a ranch building, a warehouse, or a commercial property, we handle those too.

Our services in Zapata

How a Job Works in Zapata

Step 1 is a free on-site assessment. We come out, get on the roof or inspect it safely from the ground, and look at the deck, flashing, fasteners, and drainage. You get a straight answer about whether repair makes sense or replacement is the better spend, plus a written estimate. No pressure and no surprise add-ons.

Step 2 is the work itself. In Zapata, that often means planning around wind and afternoon storms, staging materials so they do not block a narrow driveway or a ranch gate, and coordinating with the city or county on permits when a full replacement requires one. If your property is in an HOA or a design-reviewed area, we help you confirm panel profile and color before anything is ordered. We protect landscaping and walk the property before we start tearing anything off.

Step 3 is cleanup and a final walkthrough. We magnet-sweep for screws and nails, haul off old material, and go over the finished roof with you so you know what was done and what to watch for. We leave your property clean, and we do not consider the job finished until you have had a chance to look it over.

Pricing in Zapata depends on the size and pitch of the roof, how many penetrations and valleys there are, the condition of the deck and flashing, access, and how soon you need it done. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) around $7, installation around $8, replacement around $9, and standing seam around $10. Stone-coated steel and metal shingles start around $9, and copper and specialty metal around $20. Repairs and leak calls start at $450, screw replacement and re-fastening at $750, and flashing, chimney, and skylight work at $600. Coating and painting starts at $2.50 per square foot, and gutters for metal roofs run from $9 per linear foot. Storm and wind damage inspections are free. Call (956) 539-2939 for a free estimate on your specific roof.

My house is off Highway 83 near Falcon Lake and the wind never seems to stop. Will a metal roof actually stay put out here?
Yes, if it is installed for this wind exposure. We use the right panel profile, fasten into solid decking or purlins, and set screw patterns and spacing for the wind zone rather than using a one-size-fits-all layout. On open lots near the lake, edge metal and perimeter fastening get extra attention because that is where lift starts.
A storm peeled back part of my barn roof last night. How fast can you get to Zapata?
Call (956) 539-2939 as soon as you can and describe the damage. We prioritize active leaks and wind damage, and we can often get out to assess the same day or the next. We will tarp or secure what needs it, document the damage for your insurance, and give you a repair estimate.
What does a typical metal roof cost for a 1,500 square foot ranch house in Zapata?
For a simple low-pitch ranch house that size, corrugated or ribbed panel roofing often lands in the range of $8,000 to $12,000 installed, and standing seam runs higher, roughly $15,000 and up, depending on complexity. Roof shape, penetrations, deck condition, and tear-off all move the number. The free estimate is the only way to get it right.
Do I need a permit to replace my roof in Zapata, and who handles it?
A full replacement or re-roof commonly requires a permit, and the rules, fees, and inspection requirements are set by the local jurisdiction, so they must be verified with the City of Zapata or Zapata County before work starts. We help you confirm what applies to your address and factor permit timing into the schedule. Retrofit over existing shingles is also limited by code to a set number of existing layers.
My neighbor says my new roof panels overhang toward their lot line. What are the rules, and what if I have an HOA?
Property line and setback rules are set locally, so the first step is confirming your survey and checking with the city or county on any setback requirements for roof overhangs. If you are in an HOA or a design-reviewed subdivision, get the panel profile and color approved in writing before ordering. We can provide product specs and color samples to make that approval easier.
Is your crew covered by insurance while working on my property in Zapata?
Yes. We are fully insured with general liability and workers' compensation coverage. If you would like proof of coverage before we start, just ask and we will provide it. That protects you as the property owner as much as it protects our crew.
What should I be checking on my metal roof between now and next summer?
Walk the perimeter and look for backed-out or missing screws, lifted panel edges, and cracked sealant around flashing and penetrations. After a wind event, check the edges and ridge first. A yearly inspection and re-fastening where needed is far cheaper than waiting for a leak to show up inside. We offer free estimates on inspections, so it is easy to get a professional set of eyes on it before the heat ramps back up.
Why choose us?

Trusted professionals in Laredo

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Laredo

All your work handled by qualified professionals in Laredo

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

152+ Verified Client Reviews in Laredo

⭐⭐⭐⭐⭐ 4.9/5 · 152 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Laredo · Response within 24h · No commitment · ☎ (956) 539-2939

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Laredo ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm