Serving the Laredo area  ·  (956) 539-2939  ·  Open Mon-Sun 7am-7pm
📞 (956) 539-2939 Free Quote

Metal Roofing in Oilton, TX (78371) · Local Professionals

Laredo Metal Roofing · Fast response in Oilton and the Laredo area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+152Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Oilton is a small, unincorporated community in Webb County where ranch homes, oil-patch outbuildings, and wide lots sit under big South Texas skies. The housing stock here is mostly single-story ranch and manufactured homes with low-pitched shingle roofs, plus corrugated-metal barns and carports that take a beating from sun and wind. If you live off FM 2050 or near the Oilton Elementary campus, you know how fast a loose panel can turn into a leak.

Homeowners in Oilton (78371) call Laredo Metal Roofing because we understand the local conditions: triple-digit heat that bakes sealant, sudden thunderstorms that drive rain sideways, and constant wind that works fasteners loose. We are based in Laredo and serve Oilton and the surrounding ranch country, and we bring fully insured crews who know metal roofing, not just general construction.

Metal Roofing in Oilton (78371)

Most properties in Oilton sit on caliche and clay soil that shifts with the seasons, and many lots are large enough to include a shop, barn, or carport. That means we often work on multiple structures in one visit, from the house to the outbuilding. The terrain is flat to gently rolling brush country, so access is usually straightforward, but we still plan for tight spots around trees and fences. The intense UV here cracks sealant and fades paint faster than in milder climates, and wind-driven rain finds every gap in flashing or fasteners. We see a lot of failed screw gaskets, separated seams, and lifted panels after storm events, and we fix them with materials rated for this heat and wind.

Our team has worked across Webb County and the brush country toward Zapata and Hebbronville, so we know the local building styles and the common failure points. We are fully insured with general liability and workers' compensation, and we handle both residential and agricultural metal roofing.

Our services in Oilton

How a Job Works in Oilton

Step 1: Call us at (956) 539-2939 or request a free estimate online. We schedule an on-site assessment at your Oilton property, inspect the roof and attic, and discuss your options. You get a written estimate with clear pricing before any work begins.

Step 2: Once you approve, we order materials and schedule the work. For a full replacement or re-roof, we pull the required permits with the local building department (rules vary, so we verify everything first). Our crews protect your landscaping and move efficiently around outbuildings and fences. If your project needs HOA or historic review, we help coordinate that as well.

Step 3: After installation, we clean the site thoroughly, haul away old materials, and walk the roof with you to confirm everything is done right. We leave your property clean and provide care instructions for your new metal roof.

Pricing in Oilton depends on the size and pitch of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and metal roof over shingles (retrofit) at $7. Corrugated and ribbed panel roofing starts at $5.50 per square foot, which is a common choice for barns and carports. Repairs start at $450, and screw replacement and re-fastening starts at $750. Coating and painting starts at $2.50 per square foot, a good option for extending the life of an older metal roof. For a free estimate tailored to your Oilton property, call (956) 539-2939.

My ranch home near Oilton Elementary has a low-pitched shingle roof that leaks after heavy rain. Can you install metal over it?
Yes, we offer metal roof over shingles (retrofit) starting at $7 per square foot. We first inspect the existing shingles and decking to make sure they can support the new metal. If the shingles are too deteriorated or there are multiple layers, we may recommend a full tear-off instead. We will give you a clear recommendation during the free estimate.
How quickly can you respond to storm damage in Oilton?
We prioritize storm and wind damage calls in Oilton and the surrounding area. Call (956) 539-2939 and we will schedule an inspection as soon as possible, often within 24 to 48 hours depending on demand. We provide free inspections and can tarp or secure your roof if needed to prevent further damage.
What does a typical metal roof repair cost in Oilton?
Most repairs start at $450, which covers common issues like leak repair, flashing fixes, or replacing a few panels. Screw replacement and re-fastening starts at $750. The final cost depends on the extent of the damage, roof access, and material type. We give you a written estimate before any work begins.
Do I need a permit for a metal roof replacement in Oilton?
Permit requirements vary by jurisdiction, and Oilton is in an unincorporated area of Webb County. A full replacement or re-roof commonly requires a permit, and thresholds and fees vary. We verify the current rules with the local building department before starting your project, so you do not have to worry about the paperwork.
My neighbor's tree limbs hang over my roof. What can I do about property lines and HOA rules in Oilton?
In Texas, you generally have the right to trim branches that overhang your property line, but it is best to talk with your neighbor first. If you are in an HOA, check the covenants for any rules about tree maintenance or roof color and style. We can help you navigate HOA approval for your metal roof and provide documentation if needed.
Are you insured for work on my Oilton property?
Yes, we are fully insured with general liability and workers' compensation coverage. This protects you and your property in case of an accident on the job.
How often should I have my metal roof inspected in Oilton?
Because of the intense sun, wind, and occasional hail, we recommend an inspection every two to three years, and after any major storm. We offer free estimates for metal roof inspections. Regular maintenance like tightening fasteners and checking sealant can extend the life of your roof and prevent small leaks from becoming big problems.
Why choose us?

Trusted professionals in Laredo

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Laredo

All your work handled by qualified professionals in Laredo

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

152+ Verified Client Reviews in Laredo

⭐⭐⭐⭐⭐ 4.9/5 · 152 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Laredo · Response within 24h · No commitment · ☎ (956) 539-2939

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Laredo ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm